ZK Testing with Selenium IDE

From Documentation
DocumentationSmall Talks2013JulyZK Testing with Selenium IDE
ZK Testing with Selenium IDE

Author
Robert Wenzel, Engineer, Potix Corporation
Date
July 2013
Version
ZK 6.5 (or later)

WarningTriangle-32x32.png This page is under construction, so we cannot guarantee the accuracy of the content!

Introduction

So you have your nice ZK application (or plan to write one using ZK) and are interested in, how to be sure it will work in different browsers (and keep working after changes which always happen). Of course you have tested everything possible with your unit and integration tests ;-). You have maxed out the possibilities offered by ZATS to ensure the ZK components play well together in a simulated environment.

Finally you come to a point when it is necessary to check the application (or at least the key features) works and renders well in a real environment (with different browsers, real application server, real network traffic/latency etc.) - so eventually Selenium comes into play.

About this article

There are several approaches creating Selenium Tests:

The programmatic way - suitable for developers - is already covered in this Small Talk. This way offers maximum control over the test execution to write reusable, flexible, maintainable and even "intelligent" test cases. Of course writing such test cases may require some time and resources.

Some times it is up to a less technical person to create the test cases. That's when one often hears about record and replay tools. Selenium-IDE is not only such a tool, it has record and replay features but also many more options to tweak and extend your test cases after recording. In few cases the recorded tests will be instantly re-playable. Especially when it comes to AJAX there are several issues, that will prevent your test cases from executing out-of-the-box.

Here two examples (you can easily find more):

But no blaming here... Selenium-IDE is a great tool and it is free - so let's deal with it!

The major conclusion is: See Selenium-IDE more as a record/tweak/maintain and replay/debug tool to build your tests cases.

This article will show (using an example web application) how to:

  • enable useful initial test recording in ZK
  • tweak the tests so that they replay
  • keep your tests maintainable and robust to changes on your page
  • add missing actions that fail to record at all

Many ideas in the Article are based on solutions found for general problems in several forums and previous project experience. Some just reflect my personal preference how things might be handled. I will not show THE ONLY WAY how write tests for a ZK application. Just highlight problems and solutions, and discuss some considerations taken, why this approach was chosen.

Happy reading and commenting !!

Environment

  • Firefox 21 (in 22.0 Selenium-IDE is currently broken)
  • Selenium IDE 2.0.0
  • JDK 6/7
  • ZK 6.5.3
  • Maven 3.0

Steps

Initialize your environment for this example

  • Install Selenium IDE 2.0.0 in Firefox via Addons or download documentation page
  • Maven 3.0 download & install
  • download the example project. it contains the following folders:
    • selenium_example/ (the example application, maven project)
    • extensions/ (the selenium extensions used in this article)
    • test_suite/ (a Selenium Test Suite illustrating the contepts discussed here)
  • run on command line
cd selenium_example_app
mvn jetty:run

Initial Situation

  1. Launch Firefox
  2. Launch Selenium IDE CTRL+ALT+S
  3. Set the base URL to "http://localhost:8080/"
  4. open example app http://localhost:8080/selenium_testing
  5. Record login-test and try to replay it
New Test
open /selenium_testing/login.zul
type id=jXDW5 test
type id=jXDW8 test
clickAndWait id=jXDWb

Looks hard to read / maintain and doesn't even work :'(

Looking at the recorded commands and comparing the IDs with the page source we notice the IDs are generated and changing with every page refresh. So no chance to record / replay this way.

A way to make the IDs predictable is shown in the next Section.

Custom Id Generator

As mentioned in other Small Talks about testing one strategy is to use a custom IdGenerator implementation to create predictable, readable (with a business meaning) and easily selectable (by selenium) component IDs.

public class TestingIdGenerator implements IdGenerator {

	public String nextComponentUuid(Desktop desktop, Component comp,
			ComponentInfo compInfo) {
        int i = Integer.parseInt(desktop.getAttribute("Id_Num").toString());
        i++;// Start from 1
        
        StringBuilder uuid = new StringBuilder("");
        
        desktop.setAttribute("Id_Num", String.valueOf(i));
        if(compInfo != null) {
        	String id = getId(compInfo);
        	if(id != null) {
        		uuid.append(id).append("_");
        	}
        	String tag = compInfo.getTag();
        	if(tag != null) {
        		uuid.append(tag).append("_");
        	}
        }
        return uuid.length() == 0 ? "zkcomp_" + i : uuid.append(i).toString();
    }

The IDs will look like this:

  • {id}_{tag}_{##} (for components with a given id)
  • {tag}_{##} (for components without a given id - e.g. listitems in a listbox)
  • {zkcomp}_{##} (for other cases, just to make them unique)

e.g. a button in zul-file

<button id="login" label="login" />

will become something like this in HTML in browser (number can vary):

<button id="login_button_12" class="z-button-os" type="button">login</button>

In order to separate production from test configuration we can include an additional config file at startup to enable the TestingIdGenerator only for testing. In ZK this is possible by setting the library property org.zkoss.zk.config.path (also refer to our Testing Tips)

e.g. via VM argument -Dorg.zkoss.zk.config.path=/WEB-INF/zk-test.xml

Windows:

set MAVEN_OPTS=-Dorg.zkoss.zk.config.path=/WEB-INF/zk-test.xml
mvn jetty:run

Linux:

export MAVEN_OPTS=-Dorg.zkoss.zk.config.path=/WEB-INF/zk-test.xml
mvn jetty:run

TODO: improve using maven profiles...

Now we get nicer and deterministic IDs when recording a test case.

After recording login-test again and we get this:

login test
open /selenium_testing/login.zul
type id=username_textbox_6 test
type id=password_textbox_9 test
clickAndWait id=login_button_12

This already looks nice, and self explaining - Unfortunately still fails to replay :(

Why this happens and how to fix it? See next section ...

ZK specific details

ZK heavily uses JavaScript and Selenium IDE does not record all events by default. In our case here the "blur" events of the input fields have not been recorded, but ZK relies on them to determine updated fields. So we need to manually add selenium commands "fireEvent target blur" unfortunately Selenium does not offer a nice equivalent like "focus" action.

login test
open /selenium_testing/login.zul
type id=username_textbox_6 test
fireEvent id=username_textbox_6 blur
type id=password_textbox_9 test
fireEvent id=password_textbox_9 blur
clickAndWait id=login_button_12
assertLocation glob:*/selenium_testing/index.zul
verifyTextPresent Welcome test
verifyTextPresent Feedback Overview

Replaying the script finally works :D, and we see the overview page (also added a few verifications for that).

Selenium Extensions

If you find the syntax of "fireEvent" hard to remember or think it is too inconvenient to add an additional line just to update an input field there's help using a Selenium Core extension. The extension - file usually called user-extensions.js and can be used in both Selenium-IDE and Selenium RC when running the tests outside of Selenium IDE (please refer to selenium documentation).

This snippet shows 2 simple custom actions:

blur
convenience action to avoid "fireEvent locator blur"
typeAndBlur
combines the type with a blur event, to make ZK aware of the input change automatically
Selenium.prototype.doBlur = function(locator) {
    // All locator-strategies are automatically handled by "findElement"
    var element = this.page().findElement(locator);
    // Fire the "blur" event
    triggerEvent(element, "blur", false);
};

Selenium.prototype.doTypeAndBlur = function(locator, text) {
    // All locator-strategies are automatically handled by "findElement"
    var element = this.page().findElement(locator);

    // Replace the element text with the new text
    this.page().replaceText(element, text);
    // Fire the "blur" event
    triggerEvent(element, "blur", false);
};

To enable it just add the file (extensions/user-extension.js in the example zip) to the Selenium-IDE configuration. (the file contains another extension ... more about when discussing custom locators)

(Selenium-IDE Options > Options... > [General -Tab] > Selenium Core extensions)

Then restart Selenium-IDE - close the window, and reopen it - e.g. by [CTRL+ALT+S]

Adapted test using the blur action:

login test
open /selenium_testing/login.zul
type id=username_textbox_6 test
blur id=username_textbox_6
type id=password_textbox_9 test
blur id=password_textbox_9
clickAndWait id=login_button_12

Same test using the typeAndBlur:

login test
open /selenium_testing/login.zul
typeAndBlur id=username_textbox_6 test
typeAndBlur id=password_textbox_9 test
clickAndWait id=login_button_12

It is not required to use either of these extensions, but saving 1 line for each input is my personal preference.

Another thing to keep in mind is robustness and maintenance effort of test-cases when changes in the UI happen ... the generated numbers in the end of each ID are still an obstacle on this way as they are prone to change everytime a component is added or removed above that component.

Wouldn't it be nice to avoid having to adapt test cases that often? Read on...

Improve robustness and maintainability

Locators in Selenium

To remove the hard coded running numbers of the component IDs from our test cases Selenium offers e.g. XPath or CSS locators.

Using XPath is it possible to select a node by its ID-prefix:

//input[starts-with(@id, 'username_')]

This will work as long as the prefix "username_" is unique on the page, otherwise will perform the action on the first element found. So it is a good idea for this scenario to give widgets suitable IDs (plus: it will also improve the readability of source code).

In more complex cases one can select nested components to distinguish components with the same ID (e.g. in different ID spaces). e.g. if the "street" component appears several times on the page use this:

//div[starts-with(@id, 'deliveryAddress_')]//input[starts-with(@id, 'street_')]
//div[starts-with(@id, 'billingAddress_')]//input[starts-with(@id, 'street_')]

Another example to locate the "delete" button in the currently selected row of a listbox using ID prefixes, CSS-class and text comparison.

//div[starts-with(@id, 'overviewList_')]//tr[contains(@class, 'z-listitem-seld')]//button[text() = 'delete']

NOTE: Make sure not too use the "//" operator too extensively in XPath, as it might perform badly. (for me this was never a matter sofar, as there are much worse performance bottle necks, affecting your test execution speed - discussed later).

This sheet provided by Michael Sorens is an excellent reference with many helpful examples how to select page elements in various situations.

So now we can change the test case to use this kind of XPath locator, searching only by ID prefix:

login test
open /selenium_testing/login.zul
typeAndBlur //input[starts-with(@id, 'username_')] test
typeAndBlur //input[starts-with(@id, 'password_')] test
clickAndWait //button[starts-with(@id, 'login_')]

Done that, the order of the components may change without breaking the test, as long as the actual IDs are not changed. Of course this requires some manual work, but the effort invested once will pay off quickly as your project evolves.

Custom Locator and LocatorBuilder

If you don't want to change the locator to XPath manually everytime after you recorded a test case Selenium IDE has more to offer. Even improving the readability.

Custom Locator

In the user-extensions.js from above you'll find a custom locator that will hide some of the XPath complexity for simple locate scenarios. It is based on the format of IDs generated by TestingIdGenerator (from above).
// The "inDocument" is a the document you are searching.
PageBot.prototype.locateElementByZkTest = function(text, inDocument) {
    // Create the text to search for
	
    var text2 = text.trim();

	var separatorIndex = text2.indexOf(" ");
	
	var elementNameAndIdPrefix = (separatorIndex != -1 ? text2.substring(0, separatorIndex) : text2).split("#");
	var xpathSuffix = separatorIndex != -1 ? text2.substring(separatorIndex + 1) : "";
	
	var elementName = elementNameAndIdPrefix[0] || "*";
	var idPrefix = elementNameAndIdPrefix[1];

	var xpath = "//" + elementName + "[starts-with(@id, '" + idPrefix + "')]" + xpathSuffix;

    return this.xpathEvaluator.selectSingleNode(inDocument, xpath, null, this._namespaceResolver);
};

This locator will work in 2 forms

1. zktest=#login_
2. zktest=input#username_

Internally generated/queried XPaths will be

1. //*[starts-with(@id, 'login_')]
2. //input[starts-with(@id, 'username_')]
  1. will look for any element with an ID starting with "login_"
  2. will also test the elements html tag, and find the <input> element with the ID-prefix "username_..."

In Addition it is possible to append any further XPath to narrow down the results.

e.g. (to locate the second option in a <select> element)

zktest=select#priority_ /option[2]

will become in XPath

//select[starts-with(@id, 'priority_')]/option[2]

You see this locator is very basic and could be extended if one needs. It already improves readability of many use-cases.

Custom LocatorBuilder

Now to make this really handy Selenium-IDE also offers extensions (don't mix this up with Selenium Core Extension)

Add IDE extension file extensions/zktest-Selenium-IDE-extension.js from example.zip to selenium config

(Selenium IDE Options > Options... > [General -Tab] > Selenium IDE extensions)

and move it up in the Locator Builder priority list.

(Selenium IDE Options > Options... > [Locator Builders - Tab])

It contains the following LocatorBuilder which will generate the locator in form "zktest=elementTag#IdPrefix" mentioned above using only the first part of the ID (the ID prefix - its business name). If an ID does not contain 3 tokens separated by "_" it will use the full ID instead including the sequential number, this will indicate to you that the element has no ID specified and another location approach is maybe better, or just give it an ID in the zul file.

 
LocatorBuilders.add('zktest', function(e) {
	var idTokens = e.id.split("_")
	if (idTokens.length > 2) {
		idTokens.pop();
		idTokens.pop();
		return "zktest=" + e.nodeName.toLowerCase() + "#" + idTokens.join("_") + "_";
	} else {
		return "zktest=" + "#" + e.id;
	}
	return null;
});

Restart Selenium-IDE and record the test case again... and you'll get this (after changing the "type" to "typeAndBlur" events).

New Test
open /selenium_testing/login.zul
typeAndBlur zktest=input#username_ test
typeAndBlur zktest=input#password_ test
clickAndWait zktest=button#login_

More Tests

Let's record a test case for edit and save an existing "feedback item" in the list, and verify the results, and a logout test. These tests introduce new challenges testing an ajax applications with Selenium - and their solution or workarounds.

Now that we are actually changing data I adapted the login test, to user with a random user each time. So that the Mock implementation will serve fresh data for each test run, without having to restart the server, or having to cleanup (there are other strategies possible to do the same - that's just what I use here).

login test
store javascript{'testUser'+Math.floor(Math.random()*10000000)} username
open /selenium_testing/login.zul
typeAndBlur zktest=input#username_ ${username}
typeAndBlur zktest=input#password_ ${username}
clickAndWait zktest=button#login_
assertLocation glob:*/selenium_testing/index.zul
verifyTextPresent logout ${username}

Edit and Save Test

After recording and applying the typeAndBlur actions we get the following.

edit save test
open /selenium_testing/index.zul
click zktest=#button_27
typeAndBlur zktest=input#subject_ Subject 1 (updated)
typeAndBlur zktest=input#topic_ consulting
select zktest=select#priority_ label=low
click zktest=#listitem_62
typeAndBlur zktest=textarea#comment_ test comment (content also updated)
click zktest=button#submit_
assertTextPresent Feedback successfully updated
verifyTextPresent subject=Subject 1 (updated)
verifyTextPresent [text=test comment (content also updated)]
verifyTextPresent priority=low
click zktest=button#backToOverview_
assertTextPresent Feedback Overview

We still see some hard-coded numbers. I'll just delete the "click zktest=#listitem_62" as the "select" will command will just do fine (Selenium-IDE will sometimes record more than you need, and sometimes just not enough - by default).

Interesting for now is the locator "zktest=#button_27" - one of the the "edit" button. If we try to give it an ID in the zul code it will fail to render (duplicate ID), because the button is rendered multiple times - once for each <listitem>. (one workaround could be to surround it by an IDspace component or include the buttons from a different file). But it is not necessary - using the right locator XPath.

Locating an Element inside a Listbox

If you just want to locate the first edit button in the list you can use: it will find the button by its text and not by its ID

pure XPath:

//*[starts-with(@id, 'overviewList_')]//button[text() = 'edit']

ok combine with the "zktest" selector from the selenium extension above

zktest=#overviewList_ //button[text() = 'edit']

more interesting is it to locate by index, e.g. exactly the second edit button

xpath=(//*[starts-with(@id, 'overviewList_')]//button[text() = 'edit'])[2]

or even more fun to select the "edit" button inside a <listitem> containing a specific text in a cell

xpath=//*[starts-with(@id, 'overviewList_')]//*[starts-with(@id, 'listitem_')][.//*[starts-with(@id, 'listcell_')][text() = 'Subject 2']]//button[text() = 'edit']

This can get infinitely complex, and reduce the readability of your testcase. That's why it is also a good idea to write comments in your test case (yes test cases can have comments too).

Even though quite complex this last locator is still quite stable to changes in the UI. Especially when the <listbox> content changes, you can still use it to find the same <listitem> (and its button) several times in a test case.

Using Variables

Repeating them in the code will give you a headache maintaining them, when e.g. the label of the button changes from "edit" to "update". It is better to "store" locator strings or parts of them in variables, which can be reused throughout the test.

store xpath=//your/complex/locator[text() = 'edit'] editButton
... ... ...
verifyVisible ${editButton}
click ${editButton}

TODO screenshot with comments and variables

These are just a few general ideas, about what can be done to reduce the work maintaining test cases increase stability or make them more readable - at reasonable investment when setting them up (recording and adjusting) initially.

Waiting for AJAX

However rerunning the test suite at full speed (which is what we should always aim for) will - or worse, might sometimes - fail, because we don't wait long enough for ajax responses to render... there is no full page reload so Selenium-IDE does not wait automatically.

An idea might be to reduce the test speed... which would affect every step in all test cases, so we try to avoid that. Also in our feedback example there is a longer operation when clicking the "submit" button (2 seconds). Delaying every Step by 2 seconds would be devastating for our overall replay duration.

Another possibility is using the pause command and specify the number of milliseconds to wait. Also here the execution speed might vary so we are either waiting too short, so that errors still occur, or we wait too long ("just to be sure") and waste time - both not desirable.

Luckily Selenium comes with a variety of waitFor... actions, which stop the execution just until a condition is met. A useful subsection is:

  • waitForTextPresent - wait until a text is present anywhere on the page
  • waitForText - wait until an element matching a locator has the text
  • waitForElementPresent - wait until an element matched by a locator becomes rendered
  • waitForVisible - wait until an element matched by a locator becomes visible

The previously recorded "edit save test" would likely fail in line 3 just after the click on the edit button. Between Step 2 and 3 ZK is updating updating parts of the page using AJAX, causing a short delay (but long enough for our test to fail - when running at full speed).

edit save test
open /selenium_testing/index.zul
click zktest=#overviewList_ //button[text() = 'edit']
typeAndBlur zktest=input#subject_ Subject 1 (updated)
typeAndBlur zktest=input#topic_ consulting
select zktest=select#priority_ label=low
typeAndBlur zktest=textarea#comment_ test comment (content also updated)
click zktest=button#submit_
assertTextPresent Feedback successfully updated
... ... ...

So we have to wait e.g. until the new Headline "New/Edit Feedback" is present. And wait after submitting the feedback article accordingly - replace the "assertTextPresent" with "waitForTextPresent". Also the last assert... can be replaced.

edit save test
open /selenium_testing/index.zul
click zktest=#overviewList_ //button[text() = 'edit']
waitForTextPresent New/Edit Feedback
typeAndBlur zktest=input#subject_ Subject 1 (updated)
typeAndBlur zktest=input#topic_ consulting
select zktest=select#priority_ label=low
typeAndBlur zktest=textarea#comment_ test comment (content also updated)
click zktest=button#submit_
waitForTextPresent Feedback successfully updated
verifyTextPresent subject=Subject 1 (updated)
verifyTextPresent [text=test comment (content also updated)]
verifyTextPresent priority=low
click zktest=button#backToOverview_
waitForTextPresent Feedback Overview

Now this test can run as fast as possible adapting automatically, to any speedup, or slowdown of the test server.

It is also possible to implicitly wait in general for AJAX to finish at a technical level [covered here]. Personally I think it is tempting at first. After a second thought, I like the idea to explicitly wait for your expected results - only when there is need to wait.

Like that you find out directly that something on you page has affected the performance (= user experience) - in case the test suddenly fails after a change affecting the responsiveness of your application.

Additionally, there might be another delay after the AJAX response has finished, until the expected component is finally rendered on the page or visible (e.g. due to an animation). So this approach may still fail - just bare that in mind.

Logout Test

This test should be very simple, but still there is a catch. When trying to record this test, we notice that Seleniume-IDE won't record clicking on the logout button. Selenium-IDE is not very predictable about which events are recorded and which are ignored. In this case the it is a <toolbarbutton> which is rendered as a <div> so maybe that's why.

(There is a [stackoverflow question about this] and also an [IDE extension] available to enable recording of ALL clicks in a test. I tried it this one - and didn't like the big number of clicks recorded. In the end I leave it up to you to uncomment this in the IDE extension for Locator Builder provided above and judge yourself - maybe you want to test exactly this.)

As we know its name (or we can easily find out with tools like firebug) we just add another click event manually and change the locator to "zktest=div#logout_"

logout test
click zktest=div#logout_
waitForTextPresent Login (with same username as password)
assertLocation glob:*/selenium_testing/login.zul

Other Components Examples

Other components require some extra attention too when recording events on them. (sometimes you might wonder why the results are varying). So here just a few examples.

Button (mold="trendy")

The "new/edit page" of the example application contains 2 submit buttons - rendered using different molds: "default" and "trendy". Both have the same effect (save the feedback item). When you try to record the click event of the second one - labelled "submitTrendy" - Selenium-IDE just ignores the click.

Funny thing is, when you first focus another window on your desktop and then click the button directly - without prior focusing the browser window - it gets recorded. But our custom locator builder does not match here. So we get some other generic locator strings. (The "trendy" button is rendered using a layout table and images for the round corners.)

button trendy recorded locator

The second choice contains the component ID, we can use to build our own locator string.

zktest=#submitTrendy

This would usually be sufficient but not in this example. When we test it, clicking on the "Find" button in Selenium-IDE we see it is selecting the whole cell around it. ZK has generated some html elements of the layout grid around our button sharing the same ID prefix. Inpecting the element in the browser we can see the element we really want to click and that it is a element with style class z-button

<span id="submitTrendy_button_129" class="z-button">

So a more specific locator would look like this

zktest=span#submitTrendy_

or that

zktest=#submitTrendy_ [@class = "z-button"]

equivalent XPaths are:

//span[starts-with(@id, 'submitTrendy_')]
//*[starts-with(@id, 'submitTrendy_')][@class="z-button"]

Menu

Recording events on a <menubar> (even with submenus) is generally very simple. Unless you click the "wrong" areas while recording highlighted in red see image below. If you just click the menu(item)-texts (green) Selenium-IDE will create nice locators, otherwise it will fallback to some other strategy, using CSS or generated XPath which might surprise you (this is no bug in Selenium-IDE, it is just a different html element receiving the click event).

menu test (not working for us)
click css=td.z-menu-inner-m > div
click css=span.z-menuitem-img

avoid red areas, and click on the green areas

What you get avoiding the red areas.

menu test (what we want)
click zktest=button#feedbackMenu_
click zktest=a#newFeedbackMenuItem_

Tabbox

When all your <tab>s and <tabpanel>s (and nested components) have unique IDs everything is simple, but when it comes to dynamically added tabs without nice Ids things get a bit tricky.

So in our example some manual work is required to record interactions with comments tabbox.

The "new comment"-button is again a toolbarbutton like the "logout" button, so its events are not recorded automatically to create a new comment-tab just add this "click zktest=div#newComment_" manually will create a new tab. Now how to activate the new tab (Comment 1).

Locating a Tab

Automatic recording will give us this, which will work for now, and fail again after a change to the page.

click zktest=#tab_261-cnt

To avoid the hard-coded index, and truly being sure the second tab (inside our comments tabbox) is selected I would prefer this

//div[starts-with(@id, 'comments_')]//li[starts-with(@id, 'tab_')][2]

or (locating by label)

//div[starts-with(@id, 'comments_')]//li//span[text() = 'Comment 1']

It could be simplified increasing the chance of possible future failure (if there is another li inside the comments_ tabbox) using the custom zktest locator

zktest=div#comments_ //li//span[text() = 'Comment 1']

Locating a Tabpanel

Locating e.g. the <textarea> to edit the comment of the currently selected tab is somewhat more difficult, as the <tabpanels> component is not in the same branch of the Browser-DOM tree as the <tabs> component.

Easiest is to locate by index (if you know it):

//div[starts-with(@id, 'comments_')]//div[starts-with(@id, 'tabpanel_')][2]//textarea

or

zktest=div#comments_ //div[starts-with(@id, 'tabpanel_')][2]//textarea

Another approach is to just select <textarea> in the visible <tabpanel>:

//div[starts-with(@id, 'comments_')]//div[starts-with(@id, 'tabpanel_')][contains(@style, 'display: block;')]//textarea

or

zktest=div#comments_ //div[starts-with(@id, 'tabpanel_')][contains(@style, 'display: block;')]//textarea

Selecting by label of selected Tab is somewhat complex (I am sure there is a simpler solution to it - if you know feel free to share):

xpath=(//div[starts-with(@id, 'comments_')]//textarea[starts-with(@id, 'comment_')])[count(//div[starts-with(@id, 'comments_')]//li[.//span[text() = 'Comment 2']]/preceding-sibling::*)+1]

Once again we see locators are very flexible - just be creative.

Combobox

Comboboxes are also very dynamic components. So if you just want to test your page, it is easiest to just "typeAndBlur" a value into them.

typeAndBlur zktest=input#topic_ theValue

If you really need to test the <comboitems> are populated correctly, my first suggestion is to test your ListSubModel implementation in a unit test in pure java code. But if you really really need to test this in a page test you can select the combobox-dropdown button with:

zktest=i#topic_ /i
or
zktest=i#topic_ [contains(@id, '-btn')]

XPath equivalents

//i[starts-with(@id, 'topic_')]/i
or
//i[starts-with(@id, 'topic_')][contains(@id, '-btn')]

To select the "consulting" <comboitem> - via mouse - you could use the following:

New Test
click zktest=i#topic_ /i
waitForVisible zktest=div#topic_ /table
click zktest=div#topic_ //tr[starts-with(@id, 'comboitem_')]//td[text() = 'consulting']

In many cases there is no general recipe, about what is right. In most cases it helps too inspect the page source and do what you need.

Automatically run tests Selenium-RC

read next month !! :D

Appendix

Download

selenium-IDE-example.zip

Comments



Copyright © Potix Corporation. This article is licensed under GNU Free Documentation License.