Event Queues

From Documentation

Overview

An event queue is an event-based publish-subscriber solution for application information delivery and messaging. It provides asynchronous communications for different modules/roles in a loosely-coupled and autonomous fashion.

By publishing, a module (publisher) sends out messages without explicitly specifying or having knowledge of intended recipients. By subscribing, a receiving module (subscriber) receives messages that the subscriber has registered an interest in it, without explicitly specifying or knowing the publisher.

Eventqueue-concept.jpg

The purpose of event queues are two folds:

  1. Simplify the many-to-many communication.
  2. Make the application independent of the underlining communication mechanism. The application remains the same, while the event queue can be implemented with the use of Ajax, server push and even message queue.

Identification of an Event Queue

An event queue is identified by a name and a scope. The scope represents the visibility of an event queue. For example, while a desktop-scoped event queue is visible in the same desktop, the application-scoped event queue is only visible in the whole application.

Locate an Event Queue

You could locate an event queue by invoking one of the lookup method of EventQueues. For example,

EventQueues.lookup("myQueue"); //assumes the desktop scope
EventQueues.lookup("anotherQueue", EventQueues.SESSION, true);
EventQueues.lookup("anotherQueue", session, true);

Notice that if you want to locate an event queue in a working thread (rather than an event listener), you have to use EventQueues.lookup(String, Session) or EventQueues.lookup(String, Application), depending on your requirement.

The Scope of an Event Queue

There are currently four different scopes: desktop, group, session, and application. In addition, you add your own scope, such as that you can include a message queue to communicate among several servers.

Scope API Description
desktop EventQueues.lookup(String, String)

EventQueues.lookup(String, String, boolean)

The event queue is visible only in the same desktop. (DesktopEventQueue)
group EventQueues.lookup(String, String)

EventQueues.lookup(String, String, boolean)

Since 5.0.4
  • Available for ZK:
  • http://www.zkoss.org/product/zkhttp://www.zkoss.org/whyzk/zkeeVersion ee.png

The event queue is visible only in a group of desktops that belongs to the same browser tab(page). It is formed if an iframe or frameset is used. Some portal containers might cause a group of desktops to be formed too. Unlike the session and application scope, the group scope doesn't require the server push, so the communication is more efficient.

session EventQueues.lookup(String, String)

EventQueues.lookup(String, String, boolean)
EventQueues.lookup(String, Session)
EventQueues.lookup(String, Session, boolean)

The event queue is visible only in the same session. The server push will be enabled automatically if it subscribes a session-scoped event queue.

Notice that the server push is disabled automatically if the current desktop doesn't subscribe to any session- or application-scoped event queue. Also, notice that the locating and creating of an event queue and publishing an event won't start the server push.

ZK 5.0.5 and Prior: When a server push is enabled, a working thread is instantiated and started. It means this feature cannot be used in an environment that doesn't allow working threads, such as Google App Engine. No such limitation is likely to occur in ZK 5.0.6 or later.

application EventQueues.lookup(String, String)

EventQueues.lookup(String, String, boolean)
EventQueues.lookup(String, WebApp)
EventQueues.lookup(String, WebApp, boolean)

The event queue is visible only in the whole application. The server push will be enabled automatically.

Notice that the server push is disabled automatically if the current desktop doesn't subscribe to any session- or application-scoped event queue. Also notice that the locating and creating of an event queue and publishing an event won't start the server push.

ZK 5.0.5 and Prior: When a server push is enabled, a working thread is instantiated and started. It means this feature cannot be used in the environment that doesn't allow working threads, such Google App Engine. No such limitation is likely to occur in ZK 5.0.6 or later.


Here is a summary of the differences.

desktop group session application
visibility desktop group session application
publish only in an event listener, or the current execution is available. only in an event listener, or the current execution is available. no limitation no limitation
subscribe only in an event listener, or the current execution is available. only in an event listener, or the current execution is available. only in an event listener, or the current execution is available. only in an event listener, or the current execution is available.
multi-thread Not used Not used 5.0.5 or prior: Used (transparent)

5.0.6 or later: Not used

5.0.5 or prior: Used (transparent)

5.0.6 or later: Not used

server-push Not used* Not used* Used (transparent) Used (transparent)
Cluster Environment Support Support Support Unsupported (Java Spec. Limitation)
Availability
  • Available for ZK:
  • http://www.zkoss.org/product/zkhttp://www.zkoss.org/whyzk/zkeeVersion ce-pe-ee.png
  • Available for ZK:
  • http://www.zkoss.org/product/zkhttp://www.zkoss.org/whyzk/zkeeVersion ee.png
  • Available for ZK:
  • http://www.zkoss.org/product/zkhttp://www.zkoss.org/whyzk/zkeeVersion ce-pe-ee.png
  • Available for ZK:
  • http://www.zkoss.org/product/zkhttp://www.zkoss.org/whyzk/zkeeVersion ce-pe-ee.png

* If you register an asynchronous listener, it still enables server-push.

Publish and Subscribe

Publish an Event

To publish, just invoke one of the publish methods of EventQueue (returned by lookup). For example,

EventQueues.lookup("my super queue", EventQueues.APPLICATION, true)
  .publish(new Event("onSomethingHapping", null, new SomeAdditionInfo()));

The message used to communicate among publishers and subscribers is Event object, so you can use any of its subclasses you prefer.

Subscribe to an Event Queue with a Synchronous Event Listener

The event being published will be sent to each subscriber by calling the event listener the subscriber to subscribe. To subscribe, just invoke one of the subscribe methods of EventQueue (returned by lookup). For example,

EventQueues.lookup("my super queue", EventQueues.APPLICATION, true).subscribe(
  new EventListener() {
    public void onEvent(Event evt) {
       //handle the event just like any other event listener
    }
  });

The event listener is invoked just like a normal event. You can manipulate the component or do whatever as you want.


Asynchronous Event Listener

By default, the subscribed event listeners are invoked the same way as invocation of the listeners for a posted event. They are invoked one-by-one. No two event listeners belonging to the same desktop will be invoked at the same time. In addition, it is invoked under an execution (i.e., Executions.getCurrent is never null). It is allowed to manipulate the components belonging to the current execution. For sake of description, we call them synchronous event listeners.

On the other hand, the event queue also supports the so-called asynchronous event listener, which is invoked asynchronously in another thread. There is no current execution available. It is not allowed to access any component. It is designed to execute a long operation without blocking users from accessing other UI in a browser.

For more information and examples, please refer to the Long Operations: Use Event Queue section.

Clean Up

Remember to unsubscribe to an event queue with a listener when you don't need it anymore to avoid performing duplicate actions.

It's better to remove an event queue manually as you don't need it. If you create a desktop scope event queue, since it's stored as a desktop's attribute, it will be destroyed when the desktop is destroyed. The same rule applies to a session-scoped event queue.

Extend Event Queue: Add a Custom Scope

The location and creation of an event queue is actually done by a so-called event queue provider. An event-queue provider must implement the EventQueueProvider interface.

To customize it, just provide an implementation, and then specify the class name in the property called org.zkoss.zk.ui.event.EventQueueProvider.class.

For example, let us say we want to introduce the JMS scope, then we can implement as follows (only pseudo-code):

public class MyEventQueueProvider extends org.zkoss.zk.ui.event.impl.EventQueueProviderImpl {
  public EventQueue lookup(String name, String scope, boolean autocreate) {
    if ("jms".equals(scope)) {
      //create an event queue based on JMS's name
    } else
      return super.lookup(name, scope, autocreate);
  }
  public boolean remove(String name, String scope) {
    if ("jms".equals(scope)) {
      //remove the event queue based on JMS's name
    } else
      return super.removename, scope);
  }
}

Then, specify the property in WEB-INF/zk.xml

<library-property>
	<name>org.zkoss.zk.ui.event.EventQueueProvider.class</name>
	<value>MyEventQueueProvider</value>
</library-property>


Event Queues and Server Push

When an application-scope event queue is used, the server push is enabled for each desktop that subscribers belong to. In additions, a thread is created to forward the event to subscribers.

ZK has two kinds of server push: client-polling and comet[1]. The client-polling server push is implemented with an implicit timer at the client. The interval of the timer depends on the loading of the server. For example, the interval becomes longer if the time to get a response has become longer.

On the other hand, the comet server push is implemented with a pre-established and 'virtual' permanent connection. It is like sending a taxi to the server, and waiting in the server until there is data to send back. Meanwhile, the client-polling server is like sending a taxi periodically to the server, and leave immediately if no data is available.

By default, the comet server push is used. If you prefer to use the client-polling approach, just specify the following in WEB-INF/zk.xml[2].

<device-config>
	<device-type>ajax</device-type>
	<server-push-class>org.zkoss.zk.ui.impl.PollingServerPush</server-push-class>
</device-config>

  1. Comet Programming
  2. Like most ZK features, you can provide your own implementation if you like.


Use Case

Application-scope: Chatroom

Here is an example: chat.

<window title="Chat" border="normal">
	<zscript><![CDATA[
	import org.zkoss.zk.ui.event.*;
	EventQueue que = EventQueues.lookup("chat", EventQueues.APPLICATION, true);
	que.subscribe(new EventListener() {
		public void onEvent(Event evt) {
			new Label(evt.getData()).setParent(inf);
		}
	});	
	void post(Textbox tb) {
		String text = tb.value;
		if (text.length() > 0) {
			tb.value = "";
			que.publish(new Event("onChat", null, text));
		}
	}
	]]></zscript>

	Say <textbox onOK="post(self)" onChange="post(self)"/>
	<separator bar="true"/>
	<vbox id="inf"/>
</window>

Then, you can chat among two or more different computers.

Desktop scope: among Multiple ZUL Pages

It is a typical approach to split page layout with several ZUL pages, and EventQueue could also be used for communicating between these pages. Here is an example for using EventQueue to interactive between two composers. Lets say you have a main.zul page that is actually divided in two page1.zul and page2.zul

main.zul

<zk>
	<include src="page1.zul"></include>
	<include src="page2.zul"></include>
</zk>

page1.zul

<window title="ZUL page 1" border="normal" apply="demo.WindowComposer1">
	<button id="btn" label="change label in ZUL page 2" />
</window>
package demo;
public class WindowComposer1 extends SelectorComposer {

	private EventQueue eq;
	@Wire
	Button btn;
	
	@Listen("onClick = button#btn")
	public void changeLabel() {
		eq = EventQueues.lookup("interactive", EventQueues.DESKTOP, true);
		eq.publish(new Event("onButtonClick", btn, "label is Changed!"));
	}
}

page2.zul

<window title="ZUL page 2" border="normal" apply="demo.WindowComposer2">
	<label id="lbl" value="label in ZUL page 2" />
</window>
package demo;
public class WindowComposer2 extends SelectorComposer {

	private EventQueue eq;
	@Wire
	private Label lbl;
	
	public void doAfterCompose(Component comp) throws Exception {
		super.doAfterCompose(comp);
		eq = EventQueues.lookup("interactive", EventQueues.DESKTOP, true);
		eq.subscribe(new EventListener() {
			public void onEvent(Event event) throws Exception {
				String value = (String)event.getData();
				lbl.setValue(value);
			}
		});
	}
}

By doing this, you can change data in ZUL page 2 by clicking the button in ZUL page 1 Note: Open main.zul page in browser to run the above sample codes. If there are any other ZUL pages that have subscribed to the same name of the EventQueues, the content in those ZUL pages will also be updated.

Version History

Version Date Content
5.0.4 August 2010 The group scope was introduced to allow the communication among inline frames without Server Push (minimizing the network bandwidth consumption).
5.0.6 November 2010 The event queue won't start any working threads and they are serializable, so it is safe to use them in a clustering environment.



Last Update : 2021/11/19

Copyright © Potix Corporation. This article is licensed under GNU Free Documentation License.