From Documentation

Jump to: navigation, search







Since ZK 6, in addition to PollingServerPush and CometServerPush ZK provides a third Server Push implementation - Asynchronous Processing CometServerPush. As their name suggest, they implement the Client-Polling, Comet (aka., long-polling) and Servlet 3 Comet (Servlet 3 Asynchronous Processing-based Comet) server pushes. Client-Polling is available in all editions, Comet Server Push is available in ZK PE and EE, while ZK EE supports Servlet 3 Comet Push.

The default implementation depends on which ZK edition you use. By default CE uses Client Polling, PE uses Comet Server Push, EE uses Servlet 3 Comet. You can also configure ZK to use the one you prefer, or even use a custom server push.

Note that Comet Server Push is available in ZK 5 EE only. By default, ZK 5 CE and ZK 5 PE uses PollingServerPush and ZK 5 EE uses CometServerPush.

Contents

Choose an Implementation

Client-polling is based on a timer that peeks the server continuously to see if any data to be pushed to the client, while Comet establishes a permanent connection for instant push. Client-polling will introduce more traffic due to the continuous peeks, but Comet will consume the network connections that a server allows.

Page-level Configuration

You could configure a particular ZK page to use a particular implementation by the use of DesktopCtrl.enableServerPush(ServerPush). For example,

((DesktopCtrl)desktop).enableServerPush(
    new org.zkoss.zk.ui.impl.PollingServerPush(2000,5000,-1));

Application-level Configuration

If you would like to change the default server push for the whole application, you could use the the server-push-class element as follows.

<device-config>
    <device-type>ajax</device-type>
    <server-push-class>org.zkoss.zk.ui.impl.PollingServerPush</server-push-class>
</device-config>

where you could specify any implementation that implements ServerPush.

Customized Client-Polling

PollingServerPush uses a timer to peek if the server has any data to push back. The period between two peeks is determined by a few factors.

  • PollingServerPush.delay.min
    The minimal delay to send the second polling request (unit: milliseconds). Default: 1000.
  • PollingServerPush.delay.max
    The maximal delay to send the second polling request (unit: milliseconds). Default: 15000.
  • PollingServerPush.delay.factor
    The delay factor. The real delay is the processing time that multiplies the delay factor. For example, if the last request took 1 second to process, then the client polling will be delayed for 1 x factor seconds. Default: 5.
    The larger the factor is, the longer delay it tends to be.</dd>

It could be configured in WEB-INF/zk.xml by use of the preference element as follows.

<preference>
	<name>PollingServerPush.delay.min</name>
	<value>3000</value>
</preference>
<preference>
	<name>PollingServerPush.delay.max</name>
	<value>10000</value>
</preference>
<preference>
	<name>PollingServerPush.delay.factor</name>
	<value>5</value>
</preference>
<!-- JavaScript code to start the server push; rarely required
<preference>
	<name>PollingServerPush.start</name>
	<value></value>
</preference>
<preference>
	<name>PollingServerPush.stop</name>
	<value></value>
</preference>
-->

In additions, you could specify them in the constructor: PollingServerPush.PollingServerPush(int, int, int). For example,

((DesktopCtrl)desktop).enableServerPush(
    new org.zkoss.zk.ui.impl.PollingServerPush(2000,10000,3));

Comet Server Push Config

[since 8.0.2]

CometServerPush comes with its own configuration parameters such as retry delay, retry count, and ajax timeout.

  • CometServerPush.retry.delay
    The minimum time delay to send the next comet request retry (unit: milliseconds). Default: 5000.
  • CometServerPush.retry.count
    The maximum retry count if a comet request failed, -1 means keep retry forever (unit: count). Default: 10.
  • CometServerPush.ajax.timeout
    The amount of time a comet request will wait for a server response until it aborts. (unit: milliseconds). Default: varies, depending on browser

Configure these parameters by using the preference element in your WEB-INF/zk.xml

<preference>
	<name>CometServerPush.retry.delay</name>
	<value>3000</value><!-- 3 seconds delay between each retry-->
</preference>
<preference>
	<name>CometServerPush.retry.count</name>
	<value>3</value><!-- 3 tries for each request -->
</preference>
<preference>
	<name>CometServerPush.ajax.timeout</name>
	<value>180000</value><!-- 3 minutes -->
</preference>

Error Handling

The configuration of the errors is handled by the client-reload element, specified in WEB-INF/zk.xml. The markup below demonstrates an example of catching an error of the server push:

<error-reload>
    <device-type>ajax</device-type>
    <connection-type>server-push</connection-type>
    <error-code>410</error-code>
    <reload-uri>/login.zul</reload-uri>
</error-reload>

where the connection-type element specifies through which channel the requests are sent. By default it is the AU channel in which Ajax requests are sent by widgets running at the client. If you would like to specify the error page for server-push then connection-type must be set to server-push.

"dummy" Requests

When using ServerPush the client engine will send "dummy"-requests (without extra payload) to the /zkau servlet to pull queued server side updates.

Those requests look similar to this:

   dtid=z_m06&cmd_0=dummy&opt_0=i

In the case of PollingServerPush there will be one of these requests per configured interval, sometimes causing a firewall to give a false alert.

In the case of CometServerPush, after a long polling comet request returned, there will be one "dummy" request sent to retrieve server update.

Version History

Last Update : 2016/9/26


Version Date Content
6.0.0 Feb 2012 The CometServerPush is available in ZK PE, while ZK EE supports Servlet 3 Asynchronous Processing-based Comet.



Copyright © Potix Corporation. This article is licensed under GNU Free Documentation License.



You got stuck here?
Let us know how we can improve this page
For specific questions please use the forum